Tag Archives: lead

Review – Zebra DelGuard (0.5)

Posted on by
Reply

At first glance, the Zebra DelGuard looks like the popular Uni Kuru Toga and offers a similar lead-break-reducing feature (though without the point protection). The clear plastic section is molded with a similar grip and the body is black-ish and slightly thicker than the average mechanical pencil. Inside, though, is what appears to be a much simpler spring-mechanism that promises to keep your lead from snapping. Does it really do enough?

photo 2-61photo 5-18

The body is a simple, matte-black tube with a small logo just before the center-band. On the back is an attached clip with some printed information, and a chrome click-button cover that easily slips off to reveal a thin, white eraser that easily pulls out to reveal the lead tube. The (grip) section is a black, translucent, and slightly slippery-feeling plastic with some ridges for grip and a slight slope down to a small metal lead pipe.

photo 4-50photo 3-56

Performance of the main features of (mechanical) pencils is good but not outstanding. The clip holds well and doesn’t rip fabric; the eraser removes marks handily with minimal shavings (and a little bit of smear); and the lead is average verging on soft (it is fairly smooth and I like the .5 size). The actual DelGuard system is a bit more dubious to me, though. It’s basically a few springs that allow for a huge range of vertical motion for both the lead and the lead pipe. This means that if the user bears down vertically on up to a few clicks-worth of lead it will simply retreat into the pencil and not break, even with a considerable amount of force. Unfortunately, I write/draw at an angle, and that is apparently extreme enough to mean the lead will snap with an amount of pressure I usually associate with a lead snapping, since the system only relieves pressure vertically. This isn’t really an issue for me; I write/draw softly enough that lead breaking isn’t something I worry about. But it has the same problem for me that the Kuru Toga has; that is, with my writing style, the system doesn’t work, making it completely pointless. This pencil could not have its cushioning springs and be exactly the same experience for me.

photo-275photo 1-62

So, as a pencil, it’s a good writer that might be moderately overpriced (it’s more expensive than the Kuru Toga). I’ve gotten other pencils with a similar writing experience for a similar price, but this is nothing special and I personally wouldn’t get it over less-expensive Zebra models, especially since the grip doesn’t feel too good in my hands; I haven’t had it actually slip, but it just feels slippery. If you really have a serious problem with your leads breaking, this might be worth looking into, otherwise it’s just a tossup with similar models.

 

Advertisement

Review – PaperMate “Write Bros” Mechanical Pencils (48 pack)

Posted on by
Reply

PaperMate isn’t exactly known for making the most high quality products in the world. But for the most part they do make products that get the job done in an inexpensive and readily available way. And that philosophy is very apparent in the 48 pack of “Write Bros” mechanical pencils, which generally sells for as little as a 2 pack of more well-regarded pencils. Are these the perfect solution for someone looking to supply a group on the cheap/keep losing their own, or are they too fragile to be worth it?

photo 2-28

The bodies are similar in size to a normal wooden pencil, but a bit shorter at just over 6”. Molded in a slightly pearlescent plastic and one of 5 average colors, they have a ribbed grip section for the last inch and a half of the barrel, followed by a cheap-looking frosted plastic cone that is screwed onto the end and from which protrudes a small plastic “lead-pipe” and lead from inside that. Near the back of the pencil, there is an exposed click-advance mechanism with an integrated pocket clip that moves with activation. On top of that is a small white eraser, which can be removed to expose the lead chamber and allow refilling. Oddly enough at this price point, the item can be further disassembled by unscrewing the frosted cone on the front, at which point the entire advance mechanism will essentially fall out of the back of the barrel. There is nothing useful that can be done from this point, but it is interesting to look at.

photo 4-23photo 3-27

Performance is so-so to average. The 7mm HB lead is what you would expect at the price, a bit scratchy and softer than advertised (prone to breaking). The clip technically does its job but I wouldn’t count on it, and the plastic is brittle enough that it would easily snap. As far as erasing goes, the eraser is superb, but it is a small size and virtually vanishes when put to its task. The feeling of the click mechanism is unsatisfying but inoffensive in any way other than it feels like it will quickly break.

photo 1-31

Basically you get what you pay for, which in this case is not much. Even PaperMate didn’t bother putting a name on these pencils (I call them “Write Bros” because that’s what’s on the box and online, but the items themselves only say “Paper:Mate”, and “0.7mm”). But there isn’t much terribly wrong with them. If they are intended to be essentially “disposable” mechanical pencils, they succeed. Each has two leads (though many of mine were broken and thus less useable) and an eraser, enough to be useful, but little enough that the poor and brittle construction will be able to survive that use. They don’t seem to be meant to be refilled, as they aren’t worth the trouble, and being used much more would likely result in broken clips and eventually mechanisms (but it is a possibility for a little bit). And putting aside environmental or frugality concerns they are an inexpensive and relatively comfortable way to provide functional pencils to a lot of people, or many pencils to one particularly careless person.

Review – Kokuyo PS-FP102 Mechanical Pencil (.7mm) (DM)

Posted on by
Reply

In a time where a lot of companies are trying to re-invent the wheel with their pencils, Kokuyo from Japan has made a relatively inexpensive, minimalistic, and comfortable mechanical pencil. The PS-FP102 (Pencil Sharp {my guess from the website}) omits several things that could be thought of as standard, and uses that effort on a sturdy and comfortable design (that is, from what I understand, ostensibly for children in school). Is the trade-off worth it?

photo 5-7

The body is one of the simplest to be found on a mechanical pencil, being mainly a vaguely triangular-ized (at least the “frosted” versions are triangular) cylinder with a rubbery coating for the 4 ½” body. Sticking out a quarter of an inch on the back is the click-advance button, and five eighths on the front is a plastic cone, from which a smaller metal “lead-pipe” can emerge bringing the total length of the cone to three quarter inches. Printed (maybe stamped or adhered) on one of the facets is all of the information about the pencil (which seems like it will rub off in the future but has withstood use so far).

photo 2-12

The body can be unscrewed at the cone, revealing that the rubberized triangular barrel is just a sheath, and the cone mechanism can be pulled from the front. As far as I can tell no further takedown can be done and neither of these operation provide any real benefit that I can see beyond checking how much lead is in the pencil (through a convenient window {the view on my frosted black version from the outside is blocked}) and perhaps clearing out the front mechanism.

photo 5-4

Writing performance is good; the lead is a .7mm and presumably HB (there are also .9 and 1.2mm versions). It’s a bit too thick for what I usually like to write with (.5mm) but it is fairly break-resistant and smooth, which would be good qualities for a school pencil, and from what I understand that is what it was originally designed for. There is no eraser or clip (though there is a version of the pencil that comes with a stand-alone eraser and friction-fit clip) and instead of having to remove a back piece to insert lead there is simply a hole just big enough to fit the lead through that lead can be fed into. Once it has been pushed all the way in, it enters into a larger reservoir and will not likely find the correct angle with sufficient force to come back out of the hole. It’s honestly a pretty elegant lead-feeding system if one doesn’t care about having an eraser.

photo 3-11photo 4-11

The click-advance mechanism is very smooth and workable, but unsatisfying. The metal “nib”/lead-pipe at the front does retract and advance with the lead, neatly preventing any damage that it would cause but being a bit fiddly (it’s easily possible to retract the lead and not the metal piece, which is a bit of a strange situation). And the rubberized, triangularized grip is very easy to hold, not slippery at all, and quite comfortable (though not my preference), especially for hands just learning to write (it keeps fingers in the proper orientation). I must say, though, that it only barely resists rolling off the table more than its round counterparts.

photo 1-15

So instead of an eraser or clip, this pencil provides an elegant lead-feeding system, comfortable and chucky triangular grip, and a stow-away point. All of which make it a good fiddly-bit-free pencil for students, and with a slide-over clip and external eraser (the integrated ones are never enough) it might also be a preferable one for artists or in the office. For the mostly reasonable price of ¥180 (≈$1.55) it’s a solidly designed, well built little pencil that seems like it would last under a bit of stress and is certainly worth checking out if you want a triangular grip or to forgo the standard integrated eraser for greater lead convenience.

Review – QuanTum Computer Pencils

Posted on by
Reply

Recently, I’ve gotten my hands on a few inexpensive pencils from Thailand. And at 12 Bhat (34 cents) for 2 pencils and an eraser, the QuanTum Computer Pencils are fairly cheap and meant mainly for school work. But would they hold up?

photo 1-8

Most of the information printed on the package is in Thai, so the most I can get out of it is that it’s a pencil, but the information printed on the body itself is in English, which is nice for people like me. The bodies are a simple, wooden hexagonal design with one rounded end. The two in my package have silver and gold painted bodies up until the last ½”, where there is a slim band of white paint followed by black for the end. Printed (notably not stamped) on of the facets is enough of the pencil’s information to get you by.

photo 2-6photo 3-6

Out of the package, the tips of these pencils were poorly enough cut that I needed to sharpen them before being able to use them (the lead is centered, just poorly cut). The graphite itself is softer than “standard”, being a 2B, but it’s on the harder side of 2B. The very (tip) point wears off quickly but it takes some time to wear it down after that. Writing or drawing is fairly smooth and getting dark patches for test answers would be/is easy (I don’t have a scantron laying around to try it on, but it gets pretty dark). There is also a black “perfect for 2B” eraser included in a tiny card sleeve. This eraser is surprisingly good, especially with this pencil; it gets rid of almost any trace of writing besides the indent in the paper, and does so quite quickly. It is one of those that seems to evaporate when you use it, though, and there are quite a few “shavings” to sweep away (also the package says “dust free”, and I have no idea what that means).

photo 4-6

I’d call these certainly adequate for what they are trying to be: school test or general use pencils. They function perfectly well but have a few quality mishaps, and I personally am more of an HB to F kinda person for my art/writing. If you run across them they’ll likely get the job done, but there’s no real need to go out of your way (like to Thailand) to find them.

Review – INC Soft Scripts Mechanical Pencils

Posted on by
1

Pencils for the office, school, or just someone who loses their pencils a lot can get pricey, fortunately there are a lot of inexpensive options out there. But are they even worth it to try? Sure, there are a lot of inexpensive pencils, but if they don’t “pencil” there is no reason to even consider them. INC Soft Scripts are one such pencil on the less expensive side of the aisle. How well do they work?

photo-252

The design here is pretty stereotypical, with the barrel being a thin, featureless tube of black plastic that tapers at one end to a plastic lead pipe. Near this end is a rubber grip in one of a few (5 in my case) colors that is narrower in the middle and has ridges toward the end, both ostensibly to help with grip, and they succeed in being barely noticeable. On the back end is a colored plastic push-advance mechanism (that matches the grip) with integrated pocket clip and eraser holder. This bit can be removed to expose the lead-holding tube that contains 2 extra leads (for a total of 3 per pencil). The clip is nothing spectacular, with most of the necessary information on it, and fairly brittle. But I feel the entire end piece would fling off before it broke.

photo-253

Performance is what one would expect. The HB lead is middle-of-the-road, leaning toward soft, but there’s nothing particularly off about it. I personally don’t use a .7mm size but it is a fairly standard size and makes breaking less of a problem. The eraser is one of the little white ones that will get the erasing done pretty well, but will seem to disappear almost immediately. The clip is serviceable but I wouldn’t recommend using it. And, finally, the mechanism is quite solid and workable; pushing lead out and holding it in place when commanded to do so.

photo-254

They’re easily usable, but far from spectacular, pencils, with their main benefits being the rubber grip (if you happen to like those) and the fact that they are the ones at the store (if indeed they are the ones at the store). There’s nothing really there to recommend them on, but no reason to tell you to stay away, either. They will perform fine for office, school, car, or other tasks where pencils should be inexpensive because of the frequency with which they are broken or lost. In comparison to others at a similar, price it would really come down to personal preference.

Review – Western Family Mechanical Pencils

Posted on by
Reply

If you are ever in dire need of a mechanical pencil, and somehow find yourself at a shop that doesn’t sell Paper:Mate Sharpwriters at the price of whatever change you have in your pocket, or even at all, the Western Family mechanical pencils may be a cheaper, and click-advanceable, alternative. But are they actually useable?

photo-234photo-236

The body of the pencils is very simple; a smooth cylinder for the barrel with a tapering and fluted (for grip) cone leading to a plastic nub (lead pipe) at the front (this part is free spinning but doesn’t appear to detach). At the back is a nothing-special click mechanism with an integrated plastic clip (that does indeed clip to things and hold it in place, but is pretty flimsy) and a small white eraser on the back. Removing the eraser (which actually fits down inside almost all of the click mechanism) reveals the inner lead-holding tube, which comes stocked with one extra lead per pencil. The entire click mechanism can also be removed for more direct access.

photo-235

The performance is nothing to write home about. The HB 7mm lead is, as one would expect, fairly soft but not too soft, and a bit wide for people like me (I prefer 5mm, but I can live with 7). The eraser does indeed erase: it gets rid of most regular graphite marks but can be used up very quickly. The barrel of the pencil feels sturdy, but the ends are flimsy and plastic-y with tolerances that aren’t very tight.

photo-237

Overall the package is fairly bare-bones, but functional. I wouldn’t use them as my main pencils, but they’d work in a pinch. For only a few dollars you get 10 pencils (in 5 terribly boring colors) with 2 leads each and a body and eraser that will hold up probably no longer than it takes to use those 2 leads (the clip being the weakest link there). There is nothing particularly appealing aesthetically about them and no information (like lead size) other than “Western Family” printed on them. They’ll work for scattering about for use if you can’t find your normal pencil or for loaning to people who don’t care about the pencil (like at the office, or playing D&D) but I can’t recommend them for any other reason.

Review – Pentel Sharplet-2 .9mm

Posted on by
Reply

Recently I was gifted several mechanical pencils from someone who is a fan of larger lead sizes, and they were attempting to convert me. I have to say I’m not convinced, but the pencils themselves were ones I hadn’t had previous experience with. That isn’t really surprising, considering the vast array of mechanical pencils on the market from companies like Pentel, such as the gift I’m looking at today: the Pentel Sharplet-2 in .9mm.

photo-138

The pencil has a very classic and simple design that’s been around the block. At the back there is a plastic, cylindrical cover for the eraser, which is the standard tiny variety and placed over the lead tube. This back bit also serves as the click-advance mechanism. The barrel is the same diameter as the back cover, and consistent all the way down. The clip is one piece of metal that is friction fit around the barrel; it is a little stiff but keeps the pencil where you clip it. The only other features of the barrel are the brand and model information (that is engraved in as well as painted on, making it harder to wear away than on most writing implements), and about an inch of tiny ridges on the “section” (there is no separate section so that is for you to decide) for grip. The plastic cone that screws on the front is straight and unspectacular, ending in a metal pipe that makes the pencil more drafting-friendly.

photo-137

The leads pencils normally come with are all pretty standard, straddling the line between super dark and super light. The wider leads, just by virtue of being larger, require less pressure to write darker, and write (or sketch) in general with a wider and darker line. There are no real problems or tricks one has to get used to when writing. The eraser is similarly plain. It erases well, but can have trouble getting rid of darker or thicker lines like all erasers of its size that come packed in with mechanical pencils. The pencil does come in different versions for lead sizes; these are color coded for easy identification (it looks like there is some variation in the eraser color, as well).

photo-139

Pentel makes a solid pencil, and this is no exception. The design is simple, comfortable, and durable. It’s really a no-frills pencil. Everything is basic and has a function, it’s easy to disassemble and parts could be easily replaced (though it isn’t expensive enough to justify the hassle of that, it certainly isn’t a disposable pencil, though). The mechanism is satisfying to use, the grip is not slippery, the clip holds, and the retro styling makes it look kinda trendy (not that I care). If you want a simple, solid pencil or want to buy a set with easily distinguishable lead sizes, these would fit the bill.

Review – Paper:Mate Design Mechanical Pencil 0.7mm

Posted on by
Reply

t’s always nice to try new mechanical pencils, and I’ve been looking at a few recently. One that is around what might be considered “medium territory” is the Paper:Mate Design pencil (7mm #2), which has a few nice features that make it nicer than some others I’ve looked at.

20140909-224744.jpg

Starting at the mechanism, the button is quite small and has a slight angle to the top so that one’s fingers will just slide off that much easier. That being said, it works quite well. I haven’t had any issues with it, and the click is both minimal and satisfying. Removing the metal sheath reveals the eraser, which does its job. Removing the eraser gives one access to the lead, and removing the eraser holder allows one to disassemble the pencil, which is handy (one would need to unscrew the front to do that). Down from that is a clip with the Paper:Mate logo. It needs some finesse to clip on, but both holds well and is fairly easy to detach. The barrel is a medium-sized metal tube with a nice finish that simply says Paper:Mate (personally I’d’ve liked more info, but that is literally only me). The grip is a fairly hard rubber with several lines running parallel that don’t seem to do anything to improve grip. It is a bit slippery, but not to a degree that it will distract you unless you’ve used a ton of pens and pencils. There is a metal cone that leads to a smaller, retractable metal cone tip the lead flows out of. This retractable tip means that the pencil will not scratch the inside of a pocket or something, which is quite nice.

20140909-224750.jpg

The lead is alright. It is standard HB but feels a bit smoother and more break-prone than other brands of HB I’ve used. That being said, it’s broken about the same amount. I was at first apprehensive when using this pencil. It has no shock-absorbing spring and when one pushes down just after clicking, the lead retracts and makes a distracting clicking sound. This is a major problem in pens for me, and hearing the sound again and again drives me crazy, but fortunately this pencil holds the lead tight enough that I only ever hear the sound at the start of a writing session. What it does mean that is annoying, though, is that if the lead is only advanced a slight amount, a problem this pencil tends to have, then one can easily push the lead back into the pencil and be unable to write. This is actually not as major a problems as it sounds, but I feel it should be mentioned.

20140909-224755.jpg

Overall, this pencil exceeds my expectations. The retracting point and stainless steel barrel are nice features. And aside from a few minor things, everything else does its job well enough. The pencil really feels solid and good in the hand without being too heavy, and the writing experience is quite smooth. If you’re looking for a tough mechanical pencil for some mid-length writing sessions, I’d seek one out, though if you’re in an extremely demanding location or are writing for a long time (the grip is poor) you might look elsewhere.

Review – Pentel Quicker Clicker 0.5mm Mechanical Pencil

Posted on by
Reply

Two weeks ago I reviewed the Pentel Champ mechanical pencil. Maybe that’s great and works for you, but let’s take a look at something a bit upgraded: the Pentel Quicker Clicker mechanical pencils.

20140708-230846.jpg

Starting from the back of the pencil, there is a small piece of plastic with a few breathing holes to cover the eraser, which is a fairly standard, white, mechanical pencil eraser. Following that is the metal clip, which is really clip-y and will make sure this thing stays put without ripping your shirt when you take it out. Engraved at the top of this clip is all the pen’s information. It’s a little less information than I would like, but it is all the necessary stuff. Past that is a slightly smoky tube which is quite thick, and contains all of the remaining leads and has them easily visible. The grip is next, which is a hard-type rubber with small wave-ridges, making quite a comfortable grip. Inlaid in this grip is a small side-advance lever that is made of plastic but feels very solid. The front of the pencil is a small plastic cone that is slightly smoky like the barrel, with a small, thin metal tube the lead will feed through. There is, unfortunately, no method of preventing the lead from breaking.

20140708-230853.jpg

The lead is 0.5mm and comes standard in HB. This hardness is the same as a No. 2 pencil. There really isn’t much to say about it: it is a high quality lead that resists breaking to some degree and goes on the paper smoothly. It is a little bit soft for me, and I feel that the line variations caused by varying pressure on the pencil happen a little too quickly for me to enjoy it as a daily writer, but as a sketcher it is great, depending on what you prefer. It definitely isn’t as soft as some would like, or quite as hard as some others (me) would like, but it gets the job done well.

Overall, the Pentel Quicker Clicker is a nice little mechanical pencil for a low-medium price. The side-advancing feed is great for not accidentally advancing the feed while erasing, and makes it more efficient to advance the lead and write faster. The lead, clip, and eraser are all serviceable, making the slim metal tip that allows lead to be easily broken the only detractor from the overall package.

Review – Pentel Champ 0.5mm

Posted on by
Reply

I haven’t touched mechanical pencils much, just because I don’t use them very much. But mechanical pencils can obviously be quite handy, and their very consistent line makes them ideal for several styles of drawing. This time I’ll be looking at one of the cheapest offerings, the Pentel Champ in 0.5mm.

20140624-231744.jpg

The body of the Champ is a simple, translucent plastic of various colors. It’s cylindrical, save for the cone leading to the point, and a rather large rubber grip. The back is a reversed cone with a clip that’s alright, and an eraser. Obviously, this part clicks down in quite a smooth action, though lead is not dispensed with every stroke: sometimes a few beats are missed. At the very end is an eraser, which works quite well, as much as one would expect. It’s not perfect, but it removes enough lead to be worthwhile to use. On the side of the barrel is all relevant information, though it seems that it would wear off easily. The lengthy grip is noteworthy on some models, like the one I have, in that is is made of many tiny fins, which are much more comfortable and accommodating in my opinion than standard solid rubber grips, and no less grippy. It holds better in the hand than any other gripped utensil I’ve used, but I’m not really a fan of grips anyway.

20140624-231751.jpg

 

The lead provided is HB, so standard number 2, but it feels a bit soft (my package also came with 24 lead refills). It is still quite hard and writes wonderfully. I like a mid-range pencil, maybe a bit on the hard side, and this delivers. Like I said, it feels a bit softer than I usually deal with, but that might just be the mechanical pencil thing. Writing is smooth with very few hiccups or scratches. The lead isn’t too prone to breaking but breaking is unavoidable in this type of pencil. And, as previously mentioned, sometimes the mechanism doesn’t want to function.

Overall, the Pentel Champ is quite a champ for what it is: a tiny mechanical pencil more suited for school and office work. But it performs quite well in all situations. A good starting pencil in both 0.5 and 0.7mm, though I prefer 0.5mm.