Review – Pentel EnerGel X Retractable Gel Pen 0.5 Red

Posted on September 3, 2014 by Dragon Co (Austin Smith)

Some brands can have very confusing product lines. And in the world of writing instruments, Pentel is great with product and poor with names. Today I’ll be taking a look at the Pentel EnerGel X 0.5 Retractable pen in Red. This is not to be confused with any other pen in the EnerGel line, because they all have completely different bodies, though you’d likely be able to expect the same performance.

There really isn’t much to say about the body of the pen: it’s a transparent cylinder. The grip kinda works, but it isn’t the best. It’s much more slippery than some other grips. The clip is a bit plastic-y but does its job, although I wouldn’t trust it too much. The click mechanism is nice, solid and loud, nothing wimpy about it. And, strangely enough, the pen unscrews from the top to refill and not around the section.

The tip of the pen is quite thin. There is a cone, but it stops a ways from the actual point. Writing is quite smooth. Occasionally there is a skip but there are no burps or blobs. The line is quite consistent as well. The red color is quite bright, but manages to not be an eyesore. It isn’t really useful for anything but marking errors or as a distinguishing color, but it does look nice. It is water-resistant, but does smear (though it’s still readable) and I suspect that it would wash almost entirely off after major water exposure.

All in all, I’d say that this is a decent pen. They cost a bit more than similar gel pens, and the writing is a bit better. I’d say it’s definitely a step up writing-wise from a Pilot G-2 but a step down in ergonomics. It’s consistent and smooth line makes it a joy, and if that’s what you want I’d say give it a shot.

Review – Pentel GraphGear 500 Mechanical Pencil

Posted on August 29, 2014 by Dragon Co (Austin Smith)

Now, I’m a cartoonist, and when I am penciling and there is no wood pencil to be found (as there unfortunately often isn’t these days), I do use a mechanical pencil. But which one do I use? There are many “alright” and “good” mechanical pencils out there for very cheap prices. Well, I was looking for one a little better, and I found the Pentel GraphGear 500. Let’s check it out.

The top of the pencil is rather bland, with a simple metal button and a clipped-on metal clip (interesting). Down from that there is a thin hexagonal black plastic barrel with all necessary information printed on it, and then printed again on a sticker that it will all rub off of. The sticker also has some other, less-necessary info and a barcode, and has the benefit of being removable. The grip section is a very interesting knurled metal that holds quite well in the hand, isn’t sharp, and doesn’t leave one’s fingers smelling like metal as some pen/pencils do. There is then a smooth step-down/tapering tip all the way down to the lead, which in this particular model is 0.5 HB (#2).

The lead is standard HB and writes quite smoothly, it feels a bit harder than many other #2’s I’ve used, which may just be a feeling in my hand. The entire thing feels very sturdy in the hand and is great for both technical drawings and sketches. The lead is “hi-polymer”, whatever that means, but it is good, and since there is no shock absorber it has to be good at not breaking, which it also is.

There are several packages, and the one that I got has no spare erasers and only one spare piece of lead, ensuring that I have to go back and get more.

Overall the pencil is great. It works very well and is very nice to hold. It’s sturdy and keeps up with minimal wear. It’s easy to hold, easy to write (or draw) with, and stays well in the pocket. It doesn’t have any fancy features, which one could get in the higher end models, but it does cover all of the basic features and does them really well. If you want a good pencil without all the bells and whistles, I’d definitely check out the Pentel GraphGear 500.

Review – Zebra Sarasa Gel Pen

Posted on August 20, 2014 by Dragon Co (Austin Smith)

Every pen brand has its own main gel pen model, and Zebra is no exception. The Zebra Sarasa is Zebra’s main gel pen, and likely their most-recognized pen behind their steel line. How do they hold up? Let’s see.

The Sarasa starts with a very classic push button. Below that is a unique clip that holds tightly but is easy enough to get out of your pocket without a problem. Some information about the pen is printed on the clip, and nowhere else on the pen. The barrel is clear and round, down to the grip. The grip section is rubber and hard. It has a slight hourglass taper so that your fingers want to rest in the middle, and it’s harder for them to slip off. It also has several quite annoying stripes that don’t aid your grip, but instead simply make your fingers feel uncomfortable. After that is a transparent cone leading the the metal tip of the roller-ball. It’s a fairly simple and standard design, but effective.

The ink goes on the paper nicely and smoothly. It is not particularly quick to dry and can smudge easily. It is advertised as archival quality and acid-free, which I believe but haven’t tested. And while it certainly isn’t water-proof, it is water resistant. The line is medium (0.7) and the black color is quite black, and a cold black, very nice. It does absorb a bit more into cheaper paper making it harder to write in a way that looks nice, but it does preform well.

Overall, the Zebra Sarasa is an alright pen. It works well, but not as well as some other brands. If you really don’t like the grip on the Pilot G-2, or the expense of some better gel pens, then you might want to try this one out. The pocket clip is notably better, but not so much better that it’s worth getting the rest of the pen. Fortunately, it does come in a variety of colors that some other brands might not have and may come in handy.

Review – Pentel Twist-Erase Click

Posted on August 16, 2014 by Dragon Co (Austin Smith)

When looking at all of the options for mechanical pencils, one will inevitably come to the conclusion at some point that there just has to be a more efficient way to do the things mechanical pencils do. Fortunately, Pentel has you covered with the Pentel Twist-Erase click mechanical pencil, which hopefully is a lot more convenient than all of those other pencils you find around.

The top of the pencil starts with the eraser, which has a small turning ring around the bottom that can be twisted to extend the eraser as the name implies. The eraser is very long, extending to a least five times its original length. Below that is a tight, functional metal clip that holds well and is held in place by a piece of plastic. On the same lateral space is the information about the pencil, where all necessary information is written in a fairly out-of-the-way manner. Below this is a rather interesting curved breaking point in the pencil which will separate and allow the lead to be inserted. Then we get to the side-mounted click mechanism, which is placed both just above and in place of the rubber grip section. The button has a few grooves to ease pushing, but is otherwise smooth. The grip section is a thin rubber that does not let ones’ fingers slide but does not give to create something super comfortable. It is functional. Then there is a semi-transparent cone, leading to the thin metal tube that the lead will dispense out of.

The two main features of the pencil work well. The eraser twisting is easy if not buttery smooth. The pencil comes with several additional erasers which are just fine for what they are, though they won’t fully remove a hard pencil line. The side-click mechanism is easy to use, and out of the way enough that it doesn’t affect normal writing. The standard lead is HB and is really nothing special. It writes well, without any flaws that stick out. There is no shock absorption, so the lead is more likely to break than in a pencil with such a feature, but that really isn’t an issue. There are a few pieces of lead already in the pencil and it comes with a replacement container.

Really, if one is looking for a different mechanical pencil, or specifically for a longer eraser or a side advance, on a budget, this is easily the best model. There are really no frills or problems, it just functions as advertised. Sure, there are more expensive models that could do better, but one would have to pay a premium for such items. For the sake of convenience I would definitely look into and consider the Pentel Twist-Erase Click.

Review – Kikkerland Retro Ballpoint and Stylus

Posted on July 30, 2014 by Dragon Co (Austin Smith)

A while ago, I reviewed the Bic Tech Ballpoint and Stylus pen. That was one of the first pen/stylus combinations I encountered that were actually purchasable for me (I live in the middle of nowhere). Recently another of the same type of pen was given to me: the Kikkerland Retro Ballpoint and Stylus. And I like these types of pens, so let’s see how this one preforms.

The style of the pen is “retro” and it comes in three color combinations, two of which I wouldn’t consider using, while I think the third, red and grey, looks quite nice. The pen is fairly torpedo shaped, with both ends tapering down and the widest point being in the center, where there is a small center ring that divides the two body colors and metal sections. There is an almost unusably tight clip that says Kikkerland near the top, followed by a small ring with the smallish stylus point on top. Beyond that, there is no information or other markings on the pen. The paint is plain and smooth, slick enough that it almost slides out of the hand at times, but durable.

The mechanism is a twist one. It is quite smooth, almost too smooth, as pushing too hard on the pen may reverse the action. The default refill is a Cross type in medium, I’d likely buy Cross refills myself. The pen writes rather smoothly and has little in the way of startup problems, but a bit in the way of blobbing problems. It is good for short notes, but for longer writing likes to smudge and blob. It is, like most ballpoint inks, fairly water resistant.

Flipping the pen around gets you to the stylus which is a bit smaller and more precise than the Bic one mentioned earlier. It is still slightly mushy and I think these smaller styluses need work before I will thoroughly enjoy using one, but this is the most responsive one I’ve tried. Again, there are a few problems, but I have no difficulties using this to operate my phone, and carrying it around to jot down ideas in Adobe Ideas.

Overall, the pen is on par and the stylus is slightly above-average. I’d make sure the colors and styles work for you before getting it, and replace the cartridge with a Cross refill. After that, it should easily serve well. The metal in the body is sturdy and the paint resists chipping, though it does chip near the tip. It isn’t the greatest pen ever, and it won’t last forever, but it is certainly better than much of the competition for not a bad price.

Review – Ticonderoga Sensematic

Posted on July 23, 2014 by Dragon Co (Austin Smith)

Have you ever been using a mechanical pencil and thought it was too much of a hassle to push the button before writing more? If so (Dixon) Ticonderoga claims to have you covered, with the Ticonderoga Sensematic self-advancing pencil.

The body of the pencil looks like a standard pencil, but is a bit shorter. It has hexagonal sides, and a standard eraser with a metal attachment point, which screws out and contains extra lead to refill the pencil with. The tip is conical, and contains the self-advancing mechanism, from which the lead sticks out a bit.

The lead is a standard HB (#2) and is nothing really special, so I won’t say much more other than it works. The real thing to talk about is the mechanism, which the box says one can simply “just write” with and the lead will advance automatically. And, in my experience so far, this is true. I haven’t had to change anything in my writing to make it work: it just does, making it quite a handy little thing. Now it doesn’t have a very long advance, so there isn’t much lead to work with, but for writing and some sketching that isn’t a problem at all. The mechanism works by having what is essentially a click-advance near the top of the exposed lead, and when it is pushed back more lead is exposed and then locked into place. This means that there could be instances where writing stops, but this could be easily solved by rotating the pencil.

Overall, this is a great idea with good execution. I quite like it but since the erasers aren’t replaceable and the mechanism feels a bit plastic-y I’d say they won’t last forever. But they will last at least as long as a regular pencil, with much less of a hassle, so I’d say it’s a win.

Review – Bic Atlantis Ballpoint and 0.7mm Pencil

Posted on July 16, 2014 by Dragon Co (Austin Smith)

Bic is one of the most prominent manufacturers of cheap pens and pencils (and other necessary cheap plastic things). They have several lines of pens and pencils, some as expensive as a dime and some a bit more. The Bic Atlantis is a set of pencils and pens in various colors, which happen to be called the same thing. Today I’ll be taking a look at the Blue ballpoint and the 0.7mm mechanical pencil.

Despite sharing a name, the pen and pencil don’t share bodies. They do have similar styling that can be described in the same way, with the pencil being slightly thicker and a bit longer. Starting from the tip, there is a small cone, metal on the pencil, plastic on the pen. This is followed by a thin, hard rubber grip which is all right, but might as well not be there, in my opinion. Within the grip it is a clear plastic wave in the pen, while the wave is impressed into the grip of the pencil. The barrel is relatively smooth and has all necessary information. Neither have a way to twist open the barrel, but around the clip both can be opened and the insides removed (the pen is glued). Above that is the clip, which is quite different on each. The pen is a very firm, stiff piece of metal, while the pencil is much more loose and is wrapped over into the plastic body. On the top is a clicking mechanism. The pen is surprisingly quiet and unsatisfying. You’d never know it clicked if you closed your eyes, but it works well. The pencil has an eraser and a cap on it, the eraser can be removed to allow the pencil to be refilled, and the clicking works well. So both are quite different, but they are similar enough to be in the same category.

The pen gives a very fine line, which is quite smooth. However like most “smooth” ballpoints it tends to blob often and pick up paper fibers. The color is also, like most ballpoints, quite waterproof, meaning it won’t run without being completely and utterly soaked. The pens can technically be refilled, but they aren’t supposed to be. The pencil is standard 0.7 and HB, meaning it is smooth but not too smooth. They also have a retractable metal tip to prevent the inside of pockets and bags from being torn, and there is a spring which prevents the lead from breaking due to excessive pressure. I honestly think that HB (#2) is a bit too soft, but for most writing and sketching purposes it does quite well.

Overall the Bic Atlantis set is very lopsided. The pen is standard fare and not really worth much. It doesn’t do anything better than anything else in the price range, though they are quite cheap. The pencils are twice as expensive, at least, but are much more worth it. They come with extra lead and erasers, and the spring and cover mechanisms for saving the eraser and lead are almost unique for the price. It’s a great little thing that I quite enjoy using. And it might become a sketching mainstay.

Review – Pentel Quicker Clicker 0.5mm Mechanical Pencil

Posted on July 9, 2014 by Dragon Co (Austin Smith)

Two weeks ago I reviewed the Pentel Champ mechanical pencil. Maybe that’s great and works for you, but let’s take a look at something a bit upgraded: the Pentel Quicker Clicker mechanical pencils.

Starting from the back of the pencil, there is a small piece of plastic with a few breathing holes to cover the eraser, which is a fairly standard, white, mechanical pencil eraser. Following that is the metal clip, which is really clip-y and will make sure this thing stays put without ripping your shirt when you take it out. Engraved at the top of this clip is all the pen’s information. It’s a little less information than I would like, but it is all the necessary stuff. Past that is a slightly smoky tube which is quite thick, and contains all of the remaining leads and has them easily visible. The grip is next, which is a hard-type rubber with small wave-ridges, making quite a comfortable grip. Inlaid in this grip is a small side-advance lever that is made of plastic but feels very solid. The front of the pencil is a small plastic cone that is slightly smoky like the barrel, with a small, thin metal tube the lead will feed through. There is, unfortunately, no method of preventing the lead from breaking.

The lead is 0.5mm and comes standard in HB. This hardness is the same as a No. 2 pencil. There really isn’t much to say about it: it is a high quality lead that resists breaking to some degree and goes on the paper smoothly. It is a little bit soft for me, and I feel that the line variations caused by varying pressure on the pencil happen a little too quickly for me to enjoy it as a daily writer, but as a sketcher it is great, depending on what you prefer. It definitely isn’t as soft as some would like, or quite as hard as some others (me) would like, but it gets the job done well.

Overall, the Pentel Quicker Clicker is a nice little mechanical pencil for a low-medium price. The side-advancing feed is great for not accidentally advancing the feed while erasing, and makes it more efficient to advance the lead and write faster. The lead, clip, and eraser are all serviceable, making the slim metal tip that allows lead to be easily broken the only detractor from the overall package.

Review – Sharpie Twin Tip Fine/Ultra Fine

Posted on July 2, 2014 by Dragon Co (Austin Smith)

I like permanent markers, and Sharpies are some of the best. But there are many situations where the tip of a fine Sharpie is simply much to broad. Carrying around a second sharpie in extra-fine seems like a hassle, or vise-versa depending on which size one uses more. The people at Sharpie (Sanford (Rubbermaid)) must have figured this out at some point and so they now have multiple point Sharpies. Let’s take a look at the Fine/Ultra Fine version.

The body of the pen is quite like a regular fine-point Sharpie. The cap is slick with a flimsily little plastic clip built in. The body is made out of a similar material and has the necessary information printed on it. Where there would usually be a rounded-off end on a normal Sharpie, there is instead a tiny cap that has a set of spines, and is much easier to grip than the other end. Pulling either cap off reveals a slick section that is nearly identical to regular Sharpie Fines and Ultra Fines. These sections are not quite slippery enough to have the pen fall out of one’s hands during normal usage. The larger cap posts very easily on the smaller one, but in a very well-thought-out design choice, the larger cap has several small studs that allow the smaller cap to in effect be posted. This doesn’t hold the cap in the most secure manner possible, but is better than the alternative of nothing.

The tips are fairly standard. The Fine is slightly larger than a Micron 08 or about 1mm, the Ultra Fine is about 1/2 mm or about the size of a Micron 05. Both of these are large for standard writing, but for writing on boxes, other large spaces, or some drawing they are superb. The ink is standard Sharpie fare: a cold, deep black (when the marker runs dry it becomes a much warmer color) that covers well, but not the best. It is permanent and run-resistant, it stains clothes and is unpleasant on the skin. It is non-toxic for normal use, but heavily sniffing or eating would be cause for concern. Just be normal with your normal usage.

Is it worth it to get a pen with two tips? Yes, if you find a need for both. I’d suggest going with the fine more often, as the ultra fine tends to dry up faster with its smaller cap. But there is still a good amount of utility there. The thing is easy to use, and works really well. Moving, signing, warehousing, and large art pieces are where these will find their homes. And really, for a nice black permanent marker, there are few that match and none that are better.

Review – Pentel Champ 0.5mm

Posted on June 25, 2014 by Dragon Co (Austin Smith)

I haven’t touched mechanical pencils much, just because I don’t use them very much. But mechanical pencils can obviously be quite handy, and their very consistent line makes them ideal for several styles of drawing. This time I’ll be looking at one of the cheapest offerings, the Pentel Champ in 0.5mm.

The body of the Champ is a simple, translucent plastic of various colors. It’s cylindrical, save for the cone leading to the point, and a rather large rubber grip. The back is a reversed cone with a clip that’s alright, and an eraser. Obviously, this part clicks down in quite a smooth action, though lead is not dispensed with every stroke: sometimes a few beats are missed. At the very end is an eraser, which works quite well, as much as one would expect. It’s not perfect, but it removes enough lead to be worthwhile to use. On the side of the barrel is all relevant information, though it seems that it would wear off easily. The lengthy grip is noteworthy on some models, like the one I have, in that is is made of many tiny fins, which are much more comfortable and accommodating in my opinion than standard solid rubber grips, and no less grippy. It holds better in the hand than any other gripped utensil I’ve used, but I’m not really a fan of grips anyway.

The lead provided is HB, so standard number 2, but it feels a bit soft (my package also came with 24 lead refills). It is still quite hard and writes wonderfully. I like a mid-range pencil, maybe a bit on the hard side, and this delivers. Like I said, it feels a bit softer than I usually deal with, but that might just be the mechanical pencil thing. Writing is smooth with very few hiccups or scratches. The lead isn’t too prone to breaking but breaking is unavoidable in this type of pencil. And, as previously mentioned, sometimes the mechanism doesn’t want to function.

Overall, the Pentel Champ is quite a champ for what it is: a tiny mechanical pencil more suited for school and office work. But it performs quite well in all situations. A good starting pencil in both 0.5 and 0.7mm, though I prefer 0.5mm.